Helpful Tools:

• Starlink Standard Actuated with Gen 2 Router Install Guide (PDF)
• Starlink Performance (Gen 1) with Gen 2 Router Install Guide (PDF)
• Starlink Standard Actuated Kit - Setup Guide
• Starlink Performance (Gen 1) - Setup Guide

​

The Gen 2 router is compatible with the Starlink Standard Actuated Kit and the Starlink Performance (Gen 1) kit. For additional installation guidance, please click your hardware as listed below:

​

Notes:

• The Gen 2 router is compatible as a mesh router with Starlink Standard Actuated Kit and the Starlink Performance (Gen 1) kit. You will need an ethernet adapter to bypass the Gen 2 router.

 

​

The light on your router is the status:

• Solid White: Power connected
• No Light: No power connected

 

​

Getting Connected

1. Connect to the STARLINK network from your device WiFi settings.

   • 'STARLINK' is the router's default WiFi network name (SSID).

    

2. To secure your Starlink WiFi network, use the Starlink App to rename your Starlink WiFi network and create a WiFi password. Open the Starlink App > Settings > Router > enter desired WiFi network name and password > Save.

   • This step is optional, however we recommend securing your WiFi network. Your Starlink WiFi network is not password protected until you set the password.

3. You are now connected! To customize additional settings, check your connection, and more, visit the Starlink App.

​

Recommended Topics:

What is Bypass mode?

How do I set up Starlink Mesh?

I cannot get online during initial setup.